Instead of having 5 different models, the new AM-2592 will cover nearly the same output range as the previous 5 models combined
Replaced the single flighted poly auger with a custom triple flighted stainless steel auger. This allows for a much more consistent output at lower RPMs.
New motor: We replaced the small motor with a much larger, heavy duty, high torque motor. The old motors had a torque rating of 40 lb/in and the new is 132.7 lb/in – over 3X the torque.
Addition of a rotation sensor. We added a rotation sensor, should something fail the rotation sensor will notify the console that the auger is no longer turning (the LED will blink 4X fast, pause, repeat).
New SP-1sR Control. This controls the output of the applicator, has a power output for the blower kit and includes the input for the rotation sensor.
Single Wire Harness. The previous model had a separate harness and disconnect for both the blower and the Augra Meter – a 3rd would have been added for the rotation sensor. There is 1 complete wire harness, so there is only 1 disconnect between the tractor and implement.
The Augra Meter is designed for granular application at the blower or bagger, or on a small square baler or pull-type forage harvester. For self-propelled forage harvesters the KIT-AM-SPFH is recommended. For round or large square balers, both the KIT-AM-LS/RB is recommended.